Simple Crafts

Search This Blog

Easter Egg Reveal!

on April 18, 2022

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

By: Zaheem

Get link
Facebook
Twitter
Pinterest
Email
Other Apps

Comments

How To Make A Paper Eiffel Tower Model

Things Needed: Good drawing + Paper/Access to printer Paper cutter Glue Cardboard Follow the steps 1. Draw or print the following on a paper and cut it . 2. Paste each one separately on the cardboard . 3. Cut it , fold the portions with a dot and paste the four together(if confused, some steps are available in the picture) . 4. Do more things such as colouring to make it more beautiful if you want . Your Eiffel Tower is ready By: Zaheem #Simple Crafts #Crafts #Eiffel tower # Eiffel tower crafts

How To Make A Fidget Spinner

Things Needed: A Piece Of Cardboard Buttons or anything circular with light weight (Number is based on how many ends you spinner has) A Toothpick Colour Paper Scissor Glue Decorations Follow the steps 1. Draw 2 of your spinner designs on the colour paper and cut it . 2. Paste 1 on the cardboard and cut it according to the shape of the paper the paste the other paper on the other side . 3. Use the toothpick to make a hole (big enough so that the toothpick is loose) in the middle of the spinner then keep the toothpick in it . 4. Cut 2 circles from the cardboard, put a hole in their center points (not too big), put the circles 1 on each side of the toothpick and push them towards the spinner (keep a little gap between the circles and the spinner) then glue it on to the toothpick and let it dry . 5. Paste the buttons or other circle items on the fidget spinner, 1 on each end (to make it look nice paste all of them on one, either up or down) . 6. Cut the excess piece of the toothpick

How To Make A Pen Gun

Things Needed: Old Pen Paper Cutter(Optional) Scissor Rubber Band Tape Decorations Follow the steps 1. Remove the pen entirely . 2. Check whether the ink tube goes through the pen from top to bottom without any trouble. 3. If there is a problem use the paper cutter to cut the piece off the pen. 4. Cut the rubber band on one place so it can be made straight . 5. Paste the middle of the rubber band on one edge of the pen with a piece of tape, make sure it cannot be removed easily when pulled. 6. Put the pen tube in and pull it with the rubber band so that if you pull the pen tube the rubber band also gets pulled. 7. Release it from your hand. 8. Do some decorations if you want. Your Gun is ready Advice: Do not shoot at others. If so, they would be highly injured! By: Zaheem

Powered by Blogger

Theme images by klosfoto

By: Zaheem

Easter Egg Reveal!

Comments

Post a Comment